51 to 75 of 128 Permanent EMC Jobs in the UK excluding London

Hardware Test Specification. The Inspection and Test Specification identifies the inspections and tests to comply with the Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) Directive, along with any customer-specific standards. The role includes customer acceptance testing, occasional site work, and support for the Software Team on an more »

low noise/EMI, high efficiency, low power, magnetics. • Measurement & Test: Oscilloscope, Spectrum Analyser, Vector Network Analyser, Thermal Camera, Data loggers. • Design to meet EMC, Radio, and Safety regulations (e.g., EN 300220, EN61000, EN55011, EN55022). • Schematic capture and circuit simulation. • Extensive experience in product development. • Additional/Advantageous more »

Improvement: Lead initiatives to continuously improve compliance processes and systems within the organisation. Essential Qualifications/skills/experience Technical Proficiency in Electrical Safety, EMC, and Environmental. Degree or equivalent experience in an engineering discipline. 4+ years' experience in product compliance or regulatory affairs. A creative entrepreneurial attitude. Infusing more »

PIC) - Design of industrial control & data interfaces (RS422, CAN, USB, WiFi, ADC, DAC) - Complete required project documentation - PCB layout techniques for power supply and EMC performance more »

Experience with various microcontrollers Knowledge and understanding of analogue and digital circuits. Understanding of product design from spec with consideration of DFT and DFM EMC knowledge and experience FPGAs using Verilog Good understanding of test automation tools e.g. LabView Commutable to Glasgow more »

CAN, USB, WiFi, ADC, DAC) - Complete required project documentation - Design of low power switch-mode power supplies - PCB layout techniques for power supply and EMC performance more »

VHDL design, code, simulation, test, and integration and embedded IP Design verification using a combination of simulation, analysis, and test techniques, including support to EMC test houses and customer installations Generate design documentation and technical reports Interfacing with related disciplines Assist the development of higher-level system designs and more »

USB3, MIPI, PCI express, Gigabit ethernet, DDRX memory PCB layout and design constraints definition Experience with simulation tools (e.g. Hyperlynx, Sigrity, ADS,) Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector If more »

testing, documentation and certification. Using experience and technical best practice to overcome problems. Ensuring that designs comply with the appropriate international standards. Driving the EMC certification process and meeting those requirements. Adopting good design principles to mitigate supply chain dependencies. Support third parties involved in the design, prototype and more »

responsible for scheduled OS upgrades, firmware upgrades, DR tests and Data Restore tests. Any further experience with enterprise storage systems such as IBM, PURE, EMC &/or HP; and replication & backup tools such as Commvault, Mimix, Maxava, &/or Q-EDD. Based in Dorking my client offers hybrid working more »

microcontroller designs Experience in designing digital interfaces and buses USB2, SPI, I2C, GPIO etc Low power circuit design for battery powered products. Design for EMC/ESD protection. Design for Manufacturing and Test Lithium Battery & charger design experience advantageous Unique opportunity for a Principal Analogue Power Electronics Engineer to more »

Experience designing for signal and power integrity. Experience with simulation tools (e.g. Hyperlynx, Sigrity, ADS, etc. for both signal and power integrity) Design for EMC/ESD protection. Design for Manufacturing and Test Unique opportunity for a Principal Digital Electronics Engineer to take join a thriving business in the more »

qualified in a relevant discipline • Working knowledge of electrical architecture • Understand electrical theory, the operation of electronic devices, electromagnetic fundamentals and components, and vehicle EMC test requirements • Experienced in risk assessment of electrical design and generation of test plans • Understand network communications and bus principles • Ability to follow system more »

Skills and Experience Required: Electronic device testing Electronics lab equipment – oscilloscopes, soldering, signal generators etc Reading schematics and PCB designs PCB and firmware troubleshooting EMC Testing This role will best suit a motivated Electronics Test Engineer who is looking for challenging and varied work with the chance to learn more »

of Technical Expertise Exposure to some or all of the following: Environmental testing , Thermal, humidity, shock, vibration : Def Stan 00-35 Mil Std 810 EMC/electronic testing : Mil Std 1275 Mil Std 461, Def Stan 61-5 Def Stan 59-411 Desired Areas of Technical Expertise Human factors more »

order to suit the project requirements, you should have some of the following: * PCB Design Experience * Digital and Analogue Circuit Design Experience * Testing for EMC * Evaluation and Validation of Electronic Circuits Get in touch CMC provide expert engineering solutions on an international capacity for Embedded Software and other advanced more »

requirements. Control cabinet construction requirements. Compliance with assessment standards such as UKCA, CE and UL Instrumentation design including measurement range, measurement techniques, accuracy and EMC compatibility. Knowledge of PLC programming requirements and standard SCADA design and configuration including standards for user interface and alarm management. Practical experience of equipment more »

of working on projects utilising gas sensing technologies. A good understanding of common data capture software such as Tera term, real term. Experience of EMC testing. Experience of leading a small team and day to day management of their task. Experience of external certification processes. Experience of working within more »

and is a key stakeholders at design reviews. Responsible for managing the use of any external V&V facilities/test houses, i.e. organising EMC and TEMPEST qualification, collaboratively develop test harnesses with test houses. Attains and maintains technical knowledge, attending applicable training courses Actively contributes to improving processes more »

design teamsVHDL design, code, simulation, test, and integration and embedded IPDesign verification using a combination of simulation, analysis, and test techniques, including support to EMC test houses and customer installationsGenerate design documentation and technical reportsInterfacing with related disciplinesAssist the development of higher-level system designs and development of technical more »

VHDL design, code, simulation, test, and integration and embedded IP Design verification using a combination of simulation, analysis, and test techniques, including support to EMC test houses and customer installations Generate design documentation and technical reports Interfacing with related disciplines Assist the development of higher-level system designs and more »

and other rigs e.g. infotainment etc. Support for other verification/validation activities including in-market testing, rig testing, hardware-in-the-loop testing, EMC testing, telematics and system calibration. Generation of test plans and reports. Training and support for colleagues in the Workshop and Vehicle Development. Provision of more »

relevant results into databases/analysis software packages Manage the internal test facilities (test tanks, ovens, pools, lifting equipment) Liaise with external test facilities (EMC, vibration, pools, etc) Execute tests in a clear, safe and controlled manner Fault finding and failure analysis Documentation and presentation of results and findings. more »

of the Orchestra toolset (e.g. Vivaldi, Mozart, Reqtify) Experience of interfacing with third party organisations (customers, suppliers, external bodies) Understanding of certification requirements (including EMC and Environmental) Familiarity with defence standards, MIL-STDs and civil standards Previous experience of working with airworthiness organisations (DERA/CAA/FAA) An more »

replication PKI, Linux security and networking, basic scripting Storage systems, iSCSI and performance monitoring Desirable Zabbix, PRTG Cisco firewalls, routing (BGP), switching, HSRP Dell EMC servers and storage PostgreSQL management and monitoring ISO27001 Cloud Engineer Position Remuneration Salary: £40,000- £50,000 per year (plus on call allowance) This more »