1 to 25 of 28 Ethernet Jobs in the Midlands

etc. Good working knowledge of line protocols, including ISDN/PRI, DID/DNIS, VoIP, SIP, 1DM, Analog, 1.38, DS1/DS3, Metro Over Ethernet, MPLS and Broadband. Experience with Cisco CUCM/Unity/PureCloud Bridge Services/Cisco CUBE, efax. Understanding of TDM and IP voice codecs, including more »

embedded platforms, with a keen understanding of real-time constraints. A solid background in standard communication interfaces and protocols including RS-232, RS-422, Ethernet, SPI, UART, I2C, and FSK is required. · Hardware Proficiency : Experience with bench test equipment (oscilloscopes, spectrum analyzers, signal generators, etc.) is essential. Candidates should also more »

Proficiency in configuring and troubleshooting network devices at a low level, including switches, routers, firewalls and access points. Knowledge of network protocols such as Ethernet, TCP and IP, VLANs, and routing protocols such as OSPF and BGP. Familiarity with network troubleshooting tools to diagnose and resolve network issues. Understanding of more »

s role is to ensure that these services interoperate and integrate into the customer environment. Such products consist of but not limited to MPLS, Ethernet, IPsec, Managed Security Services, SD-WAN, Managed Hosting and Cloud. The TDA will own the technical delivery of the work-stream in the complex global more »

required: Embedded C/C++ RTOS Development – ThreadX ideally STM32 Cube IDE IAR tool chain Desirable skills and experience: Python CAN, RS232, RS485, I2C, Ethernet protocols Functional safety standards To be considered for this fantastic opportunity apply with an up-to-date CV today or contact Laurence Powell or Chris more »

/firmware/prototyping/microcontrollers/FPGA/RF/Cadence/MATLAB/USB/System Design/VHDL/BOM/Ethernet/CPU/Bluetooth/DFM/EMC/DSP/Power Electronics/Schematic Design Salary: circa £50k - £70k + benefits Vacancy Location: West more »

programming experience. C# programming experience (will be an advantage). Knowledge of software-based microsystems/control and communication systems, including Modbus, TCP-IP Ethernet, network communications, and its redundancy. Knowledge of automation and control system cybersecurity standards such as IEC62443. Knowledge of operating systems such as QNX, Linux, and more »

budgetary responsibilities. PLC and HMIsoftware development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols; EtherNet/IP, PROFINET, PROFIBUS DP and PA, Modbus TCP/IP Experience working with SCADA systems Knowledge and experience in virtual machines (VMWare) Good planning more »

AVR, LoRa) Expertise in debugging and improving complex software systems Experience interfacing with embedded hardware using protocols such as UART, I2C, SPI, RS232, USB, Ethernet Experience with designing, developing and verifying electronic schematics advantageous Experience with IoT and LoRa would be advantageous The Senior Firmware Development Engineer role requires the more »

Outside of IR35. Key Points: Embedded Linux development in C Knowledge of the Kernel Additional knowledge of communications development (specifically PTP/TSN/Ethernet) would be greatly beneficial Outside IR35 If you'd like to learn more then don't hesitate to reach out! Contract Embedded Linux Developer more »

Eplan or AutoCAD Must be totally conversant with PLC control systems. Extensive knowledge of automation architectures and network layers. Extensive knowledge of PROFINET or EtherNET/IP networks for distributed systems. In-depth knowledge of inverters and control wiring, preferably SEW. Experience of designing a control system to a set more »

the Telecommunications space requires an Order Delivery Coordinator to join them on a short FTC basis with a potential for permanent employment. Key Responsibility: Ethernet & Broadband Order placement. Voice and Hosting and Cloud Services Order placement. Validation and Approval of customer order form and requirements for the delivery of the more »

and to company standard functions Implementing final commissioning to handover stage Barcoding and interaction with WCS/WMS systems and networks such as Profibus, Ethernet or Asi The Candidate: To be successful in your application for the Controls & Commissioning Engineer role you will need: An Electrical engineering qualification. Experience designing more »

FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems Schneider, Brodersen, Seeprol S2000, Networks - Fibre Optic, Ethernet, Profibus Experience: Good written and spoken communication skills Previous experience as a Control Systems Engineer Full UK driving licence Happy to travel anywhere in the more »

and to company standard functions Implementing final commissioning to handover stage Barcoding and interaction with WCS/WMS systems and networks such as Profibus, Ethernet or Asi The Candidate: To be successful in your application for the Controls & Commissioning Engineer role you will need: An Electrical engineering qualification. Experience designing more »

approach. and challenge the sign-off of any new engineering systems requirements from capital projects. Skills/Experience; in Siemens, Allen Bradley, Mitsubishi and ethernet IP. Software engineer with leadership knowledge HMI, motion and communication interface proficiency. or experience CMMS experience, Agility preferred (Desirable). Management Please click ‘APPLY NOW more »

and challenge the sign-off of any new engineering systems requirements from capital projects. Skills/Experience; Experience in Siemens, Allen Bradley, Mitsubishi and ethernet IP. Experienced Software engineer with leadership knowledge PLC, HMI, motion and communication interface proficiency. Knowledge or experience CMMS experience, Agility preferred (Desirable). Project Management more »

skills Proficiency in PLC programming. Familiarity with SCADA systems and HMI design. Familiarity with industry-standard control system protocols, such as Modbus, Profibus, or Ethernet/IP. more »

The successful Controls Engineer will have experience of producing good quality Functional Design Specifications (FDS) and FAT documentation. Networking of common automation hardware including EtherNET/IP, ProfiNET, Profibus, Modbus You must be eligible to work in the UK without sponsorship. This position will suit an innovator who is constantly more »

to and from PLC connected to plant and field devices using a serial interface; data to and from PLC connected to networked devices. i.e. ethernet, modbus, etc; PLC functional control and monitoring of plant and field devices. E.g. fan control with fail-to-run monitoring. * Field device set-up and more »

Randstad are working on behalf of a client in Malvern who are on the lookout for a senior embedded software engineer. The company are in the security products industry and work on a range of detection devices. Ideally they are more »

A world-renowned luxury car manufacturer is looking to grow the team at their state-of-the-art production facility. They are actively looking for an Instrument Cluster Project Leader. The successful candidate will be responsible for feature definition & ownership more »

Field Application Engineer Job description We are seeking a proactive Field Application Engineer to collaborate closely with our existing and potential customer base. In this role you’ll be the first point of contact for a customer’s technical inquiries more »

Our OEM Client based in Coventry is searching for an Electrical Development Engineer to join their team. Please feel free to contact us to gain a better understanding of what this means for you. Job Description: This is an opportunity more »

Software Integration Manager Gaydon 5 days a week 6 Months £550 Umbrella Would you like to join a global leader in consulting, technology services and digital transformation? Responsibilities Lead Electrical Architecture, Module owner & Test Teams to implement new/existing more »