1 to 25 of 39 Permanent Ethernet Jobs in the South East

Linux experience. Must have a deep understanding of digital circuits, Microcontrollers, Microprocessors and FPGAs. Strong experience in developing and testing communication protocols (I2C, SPI, Ethernet, UART). Good knowledge on ARM drivers and low-level device interface design and development. Ability to work collaboratively and build and maintain relationships with more »

WITS-DNP3 protocols Industrial PLC and related protocols, Modbus, DF1, Ethenet/IP Networking technologies, Cellular comms, 4G/5G, CatM1, NB-IoT, LoRaWAN, Ethernet, Modems, IP, TCP, UDP Instrumentation engineering, transducer design, accuracy, reliability Hands-on experience in the design of microprocessor-based electronics hardware and embedded software Experience more »

C++ for embedded applications and 16bit/32bit microcontrollers Experience of using STM32 processors and Keil uVision development environment and tools Communications such as Ethernet, RS422/UART, CAN, SPI etc. Hardware interfacing, GPIO, ADC, DACs etc. Some appreciation of motor control principles and theory Windows/User interfaces: QT more »

Microcontrollers (STM32, ARM Cortex M etc.) Peripheral and communication protocols (SPI, I2C etc.) Non-Essential/Nice to have’s: Industrial communication protocols (EtherCAT, Ethernet/IP, ProfiNET etc.) IoT Protocols/Wireless technologies Knowledge or experience of PLCs or Control Systems Continuous integration (Jenkins, Gitlab etc.) Benefits: BUPA Medical more »

Experience with STM32 microcontrollers. Experience with Eclipse based IDEs. Knowledge of Communication Protocols such as SPI, 12C. Industrial Communication protocols such as ProfiNET, EtherCAT, EtherNet/IP. The successful Embedded Software Engineer will be part of a team steering continuous integration systems as the company continues to modernize their development more »

with C/C++ for embedded applications and microcontrollers. Familiarity with STM32 processors and Keil uVision development tools. Knowledge of communication protocols such as Ethernet, RS422/UART, CAN, SPI, etc. Hardware interfacing experience including GPIO, ADC, DACs, etc. Understanding of motor control principles is a plus. Windows/User more »

Proficiency in schematic capture and PCB layout tools (e.g., Altium). Proficiency in C and C++ firmware development. Experience designing circuits with embedded processors, Ethernet, PWM, BLE/WiFi, and displays. Strong ability to write detailed technical documentation. Basic understanding of C-sharp for internal test programs is advantageous. Familiarity more »

cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way more »

Cell electrical systems and powertrains A working understanding of High Voltage standards and practice Understanding of broader in-vehicle network technologies including: LIN, Flexray, Ethernet Familiarity with Matlab/Simulink Competent user of ETAS INCA and/or Vector toolsuite (CANalyzer/CANape/CANoe) E-CAD systems: Siemens Essentials more »

experience Embedded C (Bare metal) C++ For application development Experience of highly regulated industries is advantageous Real time embedded development (RTOS) Networking protocols experience (Ethernet and IP), DMA, PCIe Hardware interfacing (I2C, SPI, CAN, and EtherCAT) protocols Nice to haves: Experience of systems level requirements Strong troubleshooting and root cause more »

Experience with optical transceivers. Familiarity with developing software and drivers for security. Desirable Skills and Qualifications: Solid understanding of NICs and standards such as ethernet and InfiniBand. Proven experience in designing and developing software for commercial roll-out. Strong kernel debugging skills. Experience in C, C++ and Linux. Ability to more »

design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way more »

and Nokia SR OS skills would be ideal although Juniper or Nokia individually is good. Excellent understanding of layer 2 and 3 technologies including Ethernet, MPLS,IS-IS, QoS, BGP, and TCP/IP. An excellent role in an expanding and successful network service provider. NRSII JNCIP more »

Job; Strong experience of Embedded Software Experience with real-time operating system (RTOS) and embedded Linux Experience of working with common data buses including Ethernet, CAN, RS‑232 and SPI would be advantageous Experience in Defence/Aerospace/Marine/Instrumentation would be advantageous Due to the nature of more »

Design (PCB Layout/Schematic Capture) Any mix of the following is nice to have: Xilinx and Lattice FPGAs High precision Instrumentation Prototcals, USB, Ethernet, TCP/IP, UDP, sFPDP If this job is not for you then please look at my LinkedIn, I also post all my jobs on more »

capture)Good understanding of VoIP Systems (EUROCAE ED-138)Cisco CCNP/CCDE or similar (CompTIA)Relevant experience of Fault finding and repair of Ethernet Networks (Fibre and Copper)Relevant experience of System engineering on high-integrity real-time systems within large scale, multi-disciplined projects. (Enterprise Architect or MooD more »

or Structured Text programming language. Excellent verbal and written communication skills. Willingness to travel occasionally within Europe. Experience with industrial communication protocols (PROFINET, EtherCAT, Ethernet/IP, IO-Link). Familiarity with pneumatic and electrical test equipment. Project planning and management skills. Technical product support experience. Experience delivering technical training. more »

architectures, system networks and diagnostic technologies. * Working knowledge of software architectures, test and validation strategies and development environments. * Working knowledge of CAN, FlexRay, automotive ethernet, LIN networks and vehicle diagnostics. * Experience of project engineering with Tier 1 suppliers, preparation of project documentation and reports. Risk management, mitigation, and recovery planning. more »

following areas : Generating component level electronic designs for introduction into volume production Digital design including processor interfacing, memory devices, PLD interfacing, UARTs, SPI, I2C, Ethernet etc ADC/DAC devices and techniques Analogue design including op-amps, transistor-level design, control loops and low noise techniques High power techniques Experience more »

meetings and events as required. Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings. Coax, ethernet and fibreoptic cable testing and troubleshooting. Responsible for maintaining their toolkit, company vehicles (if issued) and material inventories. Responsible for maintaining their personal licenses, certifications more »

of operational networks. SC Cleared/Eligibility is Mandatory. Your Profile Key Skills/Knowledge/Experience: Operational experience in IP/MPLS/Ethernet/SDH networks ideally in a Utilities environment. Ability to manage all of resources required to run best in class network & telemetry operations. Experience of more »

designing switch mode power supplies Knowledge of hardware interfaces Component level test and fault finding Electronic circuit building and basic wiring Desirables: Embedded programming Ethernet hardware and protocols RTOS **** INTERVIEW IMMEDIATELY - FAST OFFER **** Role: Electronic Engineer Salary: up to £50,000 Location: Kent In Technology Group Ltd is acting as more »

Experience to plan and manage projects Technical product support experience Experience of delivering technical training Experience with some industrial communication protocols for example PROFINET, EtherNet/IP, EtherCAT and IO-Link Experience with some PLC engineering tools: Tia Portal, TwinCAT and Studio more »

Youll be involved in Design & Redesign of new and updated LED, Passenger information, controllers, new sign processor projects, the roll out of new Smart Ethernet based TFT systems & component obsolescence Part of all stages of the standardised V diagram within R&D, including the creation of rapid prototypes, testing, compliance more »

team of Software engineers Experience of mobile/satellite communications and their associated protocols Software Defined Radio Network architectures Communication Protocols (e.g. SPI, UART, Ethernet, PCI-Express) Communication systems, communication theory, digital signal processing (DSP, embedded firmware) Knowledge of wireless protocols such as 5G NR, LTE and 802.11 Knowledge of more »