Oxfordshire, South East, United Kingdom Hybrid / WFH Options
CMR & Life Sciences
design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way more »
to end of life Mixed signal electronic design Microprocessor system design Board layout principles Interface buses and protocols including I2C, SPI, RS485, CAN and Ethernet Design for LVD/EMC Compliance Development of requirements specifications and test procedures System level integration and testing To work with minimal supervision either on more »
Oxfordshire, South East, United Kingdom Hybrid / WFH Options
CMR & Life Sciences
cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way more »
in electrical and electronics as well as software and computer systems Electrical and mechanical practical skills Digital electronics knowledge knowledge of networking principles desirable (Ethernet and fibre optics) Will be required to travel when necessary potentially at short notice including to remote offshore locations (offshore training will be provided if more »
Stevenage, Hertfordshire, South East, United Kingdom Hybrid / WFH Options
Defence
team of Software engineers Experience of mobile/satellite communications and their associated protocols Software Defined Radio Network architectures Communication Protocols (e.g. SPI, UART, Ethernet, PCI-Express) Communication systems, communication theory, digital signal processing (DSP, embedded firmware) Knowledge of wireless protocols such as 5G NR, LTE and 802.11 Knowledge of more »
Cell electrical systems and powertrains A working understanding of High Voltage standards and practice Understanding of broader in-vehicle network technologies including: LIN, Flexray, Ethernet Familiarity with Matlab/Simulink Competent user of ETAS INCA and/or Vector toolsuite (CANalyzer/CANape/CANoe) E-CAD systems: Siemens Essentials more »
Experience with optical transceivers. Familiarity with developing software and drivers for security. Desirable Skills and Qualifications: Solid understanding of NICs and standards such as ethernet and InfiniBand. Proven experience in designing and developing software for commercial roll-out. Strong kernel debugging skills. Experience in C, C++ and Linux. Ability to more »
initiative Be able to adapt to change Excellent telephone technique and manner Experience & Training: An understanding of PSTN, ISDN, Broadband, SIP An understanding of Ethernet Technologies desirable An understanding of PBX/Hosted telephone systems (Cloud) Experience using WLR ordering portal Benefits: Competitive salary 23 days holiday (moving to more »
Job Title: Graduate OR Mid-Level or experience Electronics Firmware Engineer Location: Eastbourne East Sussex Salary: £ competitive Job Description: We are seeking a skilled Firmware Engineer with a strong background in embedded C programming and PCB design to join our more »
to gauge and predict their own performance and safety margins. The challenges of the AV platform network design are low latency, high stability, automotive ethernet integration, accurate time sync and cyber security, which makes the Sensor & Compute team a fast-paced and exciting team. Responsibilities Developing AV network architecture and … well with multiple stakeholders across several teams. Extra Kudos If You Have Previous work in IoT and/or automotive fields. Knowledge of Automotive Ethernet standards. ISO 27001/26262 compliance work. Solid Python or similar scripting capabilities Benefits We provide: Competitive salary, benchmarked against the market and reviewed annually more »
Milton Keynes, Buckinghamshire, South East, United Kingdom
Vector Recruitment Ltd
the world with their European and Asian counterpart sites! The Automation & Controls Engineer will need experience within industrial communication protocols such as PROFINET, EtherCAT, Ethernet/IP and IO-Link. This all-encompassing role will involve supporting clients technical questions, providing assistance for specific customer applications and performing faulty investigations … Experience to plan and manage projects. Technical product support experience Experience of delivering technical training Experience with some industrial communication protocols for example PROFINET, EtherNet/IP, EtherCAT and IO-Link Experience with some PLC engineering tools: Tia Portal, TwinCAT and Studio 5000 Does this sound like you? If so more »
experience Embedded C (Bare metal) C++ For application development Experience of highly regulated industries is advantageous Real time embedded development (RTOS) Networking protocols experience (Ethernet and IP), DMA, PCIe Hardware interfacing (I2C, SPI, CAN, and EtherCAT) protocols Nice to haves: Experience of systems level requirements Strong troubleshooting and root cause more »
architectures, system networks and diagnostic technologies. * Working knowledge of software architectures, test and validation strategies and development environments. * Working knowledge of CAN, FlexRay, automotive ethernet, LIN networks and vehicle diagnostics. * Experience of project engineering with Tier 1 suppliers, preparation of project documentation and reports. Risk management, mitigation, and recovery planning. more »
following areas : Generating component level electronic designs for introduction into volume production Digital design including processor interfacing, memory devices, PLD interfacing, UARTs, SPI, I2C, Ethernet etc ADC/DAC devices and techniques Analogue design including op-amps, transistor-level design, control loops and low noise techniques High power techniques Experience more »
of operational networks. SC Cleared/Eligibility is Mandatory. Your Profile Key Skills/Knowledge/Experience: Operational experience in IP/MPLS/Ethernet/SDH networks ideally in a Utilities environment. Ability to manage all of resources required to run best in class network & telemetry operations. Experience of more »
understanding of wiring looms at a system level and ability to troubleshoot existing looms A strong understanding various communication protocols such as CAN, LIN & Ethernet, and ability to troubleshoot existing buses and networks Experience in motorsport control systems, data loggers and related software Experience in unit testing, Software in the more »
Microcontrollers (STM32, ARM Cortex M etc.) Peripheral and communication protocols (SPI, I2C etc.) Non-Essential/Nice to have’s: Industrial communication protocols (EtherCAT, Ethernet/IP, ProfiNET etc.) IoT Protocols/Wireless technologies Knowledge or experience of PLCs or Control Systems Continuous integration (Jenkins, Gitlab etc.) Benefits: BUPA Medical more »
startup environment Candidates will need to be US citizens or current Green Card Holders. Preferred Skills and Experience Experience with high speed data links, Ethernet, PCI-E, etc. Experience with networking protocol Experience with signal transformation and processing Experience developing fault tolerant systems If you are interested in this role more »
Portsmouth, England, United Kingdom Hybrid / WFH Options
Aeropeople Ltd
related subject · Generating component level electronic designs for introduction into volume production · Digital design including processor interfacing, memory devices, PLD interfacing, UARTs, SPI, I2C, Ethernet etc · ADC/DAC devices and techniques · Analogue design including op-amps, transistor-level design, control loops and low noise techniques · High power techniques · Experience more »
performance issues and areas for improvement. Required Skills/Experience The ideal candidate will have the following: Working with networking and serial protocols (eg, Ethernet, CAN, RS232); video encoding (eg, H264) and transmission protocols (eg, MPEG-TS); and RF systems Experience with electronics hardware and software and design principles Developing more »
C++ for embedded applications and 16bit/32bit microcontrollers Experience of using STM32 processors and Keil uVision development environment and tools Communications such as Ethernet, RS422/UART, CAN, SPI etc. Hardware interfacing, GPIO, ADC, DACs etc. Some appreciation of motor control principles and theory Windows/User interfaces: QT more »
Job; Strong experience of Embedded Software Experience with real-time operating system (RTOS) and embedded Linux Experience of working with common data buses including Ethernet, CAN, RS‑232 and SPI would be advantageous Experience in Defence/Aerospace/Marine/Instrumentation would be advantageous Due to the nature of more »
FTView ME and SE, AVEVA InTouch and System Platform, Schneider +ClearSCADA, GE iFIX, Siemens WinCC +Telemetry Systems - Schneider, Brodersen, Seeprol S2000, +Networks - Fibre Optic, Ethernet, Profibus +Previous experience in a similar role +Full UK driving licence or working towards one +Happy to travel anywhere in the UK If you'd more »
