1 to 25 of 156 Ethernet Jobs in the UK excluding London

in firmware testing methods The below is a benefit: - C Programming - Knowledge of IP networks & Wireshark - Interface protocol experience (DDR3/4, PCIe & 100G Ethernet) This is a Hybrid Inside IR35 position, offering a 3 on-site 2 remote split. You must be OK with this commitment to be considered more »

Our OEM Client based in Coventry is searching for an Electrical Development Engineer to join their team. Please feel free to contact us to gain a better understanding of what this means for you. Job Description: This is an opportunity more »

a few of the following areas:Technical problem troubleshootingPerformance troubleshooting for compute, network or storage bottlenecksA solid grasp of IP and subnettingAn understanding of ethernet, switching, cabling and patching.Experience in an environment where security and network protection are keyInstallation, configuration or administration of:Windows ServersLinux ServersVmware ESX ServersHyper V ServersSQL more »

Microcontrollers (STM32, ARM Cortex M etc.) Peripheral and communication protocols (SPI, I2C etc.) Non-Essential/Nice to have’s: Industrial communication protocols (EtherCAT, Ethernet/IP, ProfiNET etc.) IoT Protocols/Wireless technologies Knowledge or experience of PLCs or Control Systems Continuous integration (Jenkins, Gitlab etc.) Benefits: BUPA Medical more »

z2bz0 minimum years of industry experience Experience of developing real-time embedded software Embedded Software Programming in C++ Network interfaces – SPI, I2C, USB, UART, Ethernet, TCP/IP, UDP, BLE, WI-FI Experience use of agile development practices to write clean, testable code for complex products and systems Knowledge/ more »

Motivated & High standards Embedded Linux/ZephyrOS/FreeRTOS STM32/NXP i.MXRT/ARM M4, M7, A53, etc USB principals and peripheral drivers Ethernet principals and peripheral drivers Emscripten for running C++ applications in the browser If you have an interest in digital audio and/or layer more »

WITS-DNP3 protocols Industrial PLC and related protocols, Modbus, DF1, Ethenet/IP Networking technologies, Cellular comms, 4G/5G, CatM1, NB-IoT, LoRaWAN, Ethernet, Modems, IP, TCP, UDP Instrumentation engineering, transducer design, accuracy, reliability Hands-on experience in the design of microprocessor-based electronics hardware and embedded software Experience more »

Proficiency in configuring and troubleshooting network devices at a low level, including switches, routers, firewalls and access points. Knowledge of network protocols such as Ethernet, TCP and IP, VLANs, and routing protocols such as OSPF and BGP. Familiarity with network troubleshooting tools to diagnose and resolve network issues. Understanding of more »

control system applications throughout the project lifecycle from initial design concepts through to installation and subsequent client support. Communications protocols including Modbus, OPC, DH+, Ethernet/IP, Profibus, ControlNet. Understanding of Control and Instrumentation. Understanding of Functional Safety Management requirements to IEC 61508 & IEC61511. Configuration of HMI and SCADA packages more »

startup environment Candidates will need to be US citizens or current Green Card Holders. Preferred Skills and Experience Experience with high speed data links, Ethernet, PCI-E, etc. Experience with networking protocol Experience with signal transformation and processing Experience developing fault tolerant systems If you are interested in this role more »

have: Power Electronics (DC-DC converters etc.) Embedded Software (Embedded C/C++) Microcontrollers (ARM Cortex, M-Series etc.) Networking protocols/Communication interfaces (Ethernet, MODBUS, TCP/IP etc.) Benefits: 10% bonus Private medical & health insurance Up to 5% matched pension (10% total) Flexible & Hybrid working If you are more »

The successful Controls Engineer will have experience of producing good quality Functional Design Specifications (FDS) and FAT documentation. Networking of common automation hardware including EtherNET/IP, ProfiNET, Profibus, Modbus You must be eligible to work in the UK without sponsorship. This position will suit an innovator who is constantly more »

Exsel Electronics are currently seeking to fill a number of Software Engineering roles. A minimum of 2 years commercial or academic programming. General Purpose of the Role The purpose of this role is to be a key part of a more »

cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way more »

the customers regulatory requirements Communicate accurate project status to the Software Manager, internal and external customers and suppliers Networking of common automation hardware including EtherNET/IP, ProfiNET, Profibus, Modbus You must be eligible to work in the UK without sponsorship Machine safety knowledge e.g. BS EN ISO 13849 MS more »

Semaphores) Interrupts, clock systems and interfacing with memory mapped peripherals Using and writing drivers for common MCU interfaces (e.g. GPIO, USART, SPI, I2C, USB, Ethernet) Reading electronic schematics and component datasheets Desirable experience : 32-bit ARM Cortex-M3, M4F, M7 MCUs from Microchip FreeRTOS Git version control Complying with MISRA … C Industrial protocols such as Modbus, HART, Foundation Fieldbus, Profibus Ethernet protocols such as HTTP, NTP Troubleshooting using standard lab equipment (e.g. oscilloscope, logic analyser) Testing (unit, integration and system) Agile development methodologies EDA tools (e.g. Altium) Functional Safety (IEC 61508) lifecycles Electronics engineering or computer science degree or other more »

successful PLC Software Engineer will have experience of producing good quality Functional Design Specifications (FDS) and FAT documentation. Networking of common automation hardware including EtherNET/IP, ProfiNET, Profibus, Modbus You must be eligible to work in the UK. This position will suit an innovator who is constantly looking for more »

sub system test strategy. Desirable Skills: Electronics Design experience High Speed Digital Design High speed digital design interfaces e.g. USB3, MIPI, PCI express, Gigabit ethernet, DDRX memory PCB layout and design constraints definition Experience with simulation tools (e.g. Hyperlynx, Sigrity, ADS,) Design for EMC/ESD protection Design for Manufacturing more »

Cell electrical systems and powertrains A working understanding of High Voltage standards and practice Understanding of broader in-vehicle network technologies including: LIN, Flexray, Ethernet Familiarity with Matlab/Simulink Competent user of ETAS INCA and/or Vector toolsuite (CANalyzer/CANape/CANoe) E-CAD systems: Siemens Essentials more »

and to company standard functions Implementing final commissioning to handover stage Barcoding and interaction with WCS/WMS systems and networks such as Profibus, Ethernet or Asi The Candidate: To be successful in your application for the Controls & Commissioning Engineer role you will need: An Electrical engineering qualification. Experience designing more »

design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way more »

Works with telecommunication companies to turn up circuits. Circuits include but not limited to: leased line DS0, DS1, DS1 hubs, DS3, DS3 hubs, OC3+, Ethernet, Frame Relay, DSL, ISDN, VPN, MPLS Ensure Remedy database integrity is always maintained and highlight where existing data requires updating Proactively highlight where processes can more »

charger and telecoms equipment installation & commissioning to an excellent standard Performing Industry standard testing as required on telecoms and antenna systems e.g. BERT (E1 & Ethernet), RF sweeps, PIM, TDR, OTDR & OSCAR tests Wiring and connection of DC power to telecoms equipment to required standards and regulations 1st Line Support and more »

FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems Schneider, Brodersen, Seeprol S2000, Networks - Fibre Optic, Ethernet, Profibus Experience: Good written and spoken communication skills Previous experience as a Control Systems Engineer Full UK driving licence Happy to travel anywhere in the more »

budgetary responsibilities. PLC and HMIsoftware development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols; EtherNet/IP, PROFINET, PROFIBUS DP and PA, Modbus TCP/IP Experience working with SCADA systems Knowledge and experience in virtual machines (VMWare) Good planning more »