1 to 25 of 56 Contract Test Engineer Jobs

Network Test Engineer (Cisco, Networks, Telecoms Infrastructure) 6 Month Contract Newbury (Hybrid) £290-£300/day (Outside IR35) Network CISCO Test Engineer needed for a 6 Month Contract in Newbury (Hybrid). Start ASAP in September/October 2025. Must have specific experience of testing Telecoms Network Infrastructure including: CISCO Switches, Routers, Firewalls, RFC 2544 testing … the office + 4 days/week working remotely (WFH). Occasional travel to other sites including: Farnborough, Bath, Oxford, Warwick + Birmingham. Key experience + tasks will include: Test Engineer needed to support a Critical National Infrastructure (CNI) network connectivity transformation programme. Creating test scripts from Test Plans and Low Level Designs for Network infrastructure … eg- Switches, Routers, Firewalls. Cisco Switch/Router console commands , setting up network test equipment for RFC 2544 testing + handling fibre optic cabling. Perform RFC 2544 performance testing and network connectivity testing Importing test cases, test case management, collecting test execution evidence, reporting execution and defect management in ALM. Using StableNet Network and Service Management More ❯

Network Test Engineer (Cisco, Networks, Telecoms Infrastructure) 6 Month Contract Newbury (Hybrid) £290-£300/day (Outside IR35) Network CISCO Test Engineer needed for a 6 Month Contract in Newbury (Hybrid). Start ASAP in September/October 2025. Must have specific experience of testing Telecoms Network Infrastructure including: CISCO Switches, Routers, Firewalls, RFC 2544 testing … the office + 4 days/week working remotely (WFH). Occasional travel to other sites including: Farnborough, Bath, Oxford, Warwick + Birmingham. Key experience + tasks will include: Test Engineer needed to support a Critical National Infrastructure (CNI) network connectivity transformation programme. Creating test scripts from Test Plans and Low Level Designs for Network infrastructure … eg- Switches, Routers, Firewalls. Cisco Switch/Router console commands , setting up network test equipment for RFC 2544 testing + handling fibre optic cabling. Perform RFC 2544 performance testing and network connectivity testing Importing test cases, test case management, collecting test execution evidence, reporting execution and defect management in ALM. Using StableNet Network and Service Management More ❯

Production Test Engineer 12-month contract Based in Stevenage Offering 36ph Inside IR35 Are you an experienced Electronics Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the … Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support … to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations More ❯

Production Test Engineer 12-month contract Based in Bolton Offering 37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production … Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to … operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your More ❯

Expleo is proud to be supporting a leading automotive manufacturer in delivering excellence across their production vehicle lines. Were currently looking for an Infotainment Test Engineer to be responsible for the hands-on testing of automotive infotainment systems. This contract role will be supporting our client in Gaydon. The Infotainment Test Engineer will be responsible for … Leading the delivery of test programmes, ensuring results are achieved through thorough validation and effective problem-solving. Planning and executing comprehensive testing of infotainment systems, with a focus on active NVH technologies. Ensuring all testing activities comply with automotive quality standards and technical specifications. Identifying performance issues across systems and subsystems and proactively drive enhancements. Developing and implement test specifications for both new and existing infotainment components. Setting up, managing, and maintaining of test rigs and environments for infotainment and audio system evaluation. Essential skills of the Infotainment Test Engineer: Extensive experience in testing automotive infotainment systems, with a strong preference for exposure to active NVH technologies. Highly execution-driven, capable of independently managing and More ❯

Expleo is proud to be supporting a leading automotive manufacturer in delivering excellence across their production vehicle lines. We're currently looking for an Infotainment Test Engineer to be responsible for the hands-on testing of automotive infotainment systems. This contract role will be supporting our client in Gaydon. The Infotainment Test Engineer will be responsible … for: Leading the delivery of test programmes, ensuring results are achieved through thorough validation and effective problem-solving. Planning and executing comprehensive testing of infotainment systems, with a focus on active NVH technologies. Ensuring all testing activities comply with automotive quality standards and technical specifications. Identifying performance issues across systems and subsystems and proactively drive enhancements. Developing and implement … test specifications for both new and existing infotainment components. Setting up, managing, and maintaining of test rigs and environments for infotainment and audio system evaluation. Essential skills of the Infotainment Test Engineer: Extensive experience in testing automotive infotainment systems, with a strong preference for exposure to active NVH technologies. Highly execution-driven, capable of independently managing More ❯

NVH Modal Test Engineer - (phone number removed) - £27.30/hr umbrella rate (Iside IR35) Are you ready to accelerate your career with an exciting opportunity to work on cutting-edge engineering projects? This is your chance to join a forward-thinking company that values innovation, precision, and collaboration. As an NVH Modal Test Engineer, you will … shaker equipment. - Strong knowledge of NVH signal processing and analysis, with expertise in modal, structural, and transfer function analysis. - A methodical approach to planning, executing, and reporting high-quality test results. - Effective communication skills to present complex data clearly and collaborate within a team. - Practical skills to set up and instrument tests, including designing fixtures or rigs for fabrication. … In this role, you will contribute to the company's mission to deliver engineering excellence and drive innovation. Your expertise as an NVH Modal Test Engineer will directly support the development of groundbreaking technologies and ensure the highest standards of quality and performance. Location: This role is based in Gaydon, a hub of engineering innovation and excellence. Interested More ❯

Lead Audio Validation and Test Engineer - (phone number removed) - £33.98/hr (Umbrella Rate - Inside IR35) Are you ready to take your career to the next level with an opportunity that combines cutting-edge technology and hands-on expertise? This role as a Lead Audio Validation and Test Engineer offers you the chance to immerse yourself … in a fast-paced, collaborative environment, this position is perfect for someone with a passion for delivering excellence in audio systems validation. What You Will Do: - Plan and execute test programmes for automotive infotainment systems, with a focus on active NVH technologies. - Define and apply testing specifications for both new and existing infotainment components. - Identify and resolve issues, driving … improvements in system and subsystem performance. - Set up and maintain test rigs and environments for infotainment and audio system validation. - Collaborate with cross-functional teams, including hardware, software, and NVH specialists, to ensure integrated system validation. - Document test procedures, configurations, and results with precision, ensuring alignment with automotive quality standards. What You Will Bring: - Proven experience in testing More ❯

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Development and Production Test Engineer – Electronic/Electrical subcontractor on an initial 12 month contract. Experience specifically required: Must have significant experience with measurement and test principles, and associated test equipment. Electronic Component level fault finding CADMID product lifecycle for test … High Voltage training/awareness. SAP Beneficial The department are keen to hear from candidates from a background with either RF/Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £36.00ph (Umbrella). Time and a quarter Overtime rate for hours worked over 37 hours Contract Duration: 12 Months (initially and then ongoing … and long-term thereafter) Development and Production Test Engineer – Electronic/Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical More ❯

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Development and Production Test Engineer Electronic/Electrical subcontractor on an initial 12 month contract. Experience specifically required: Must have significant experience with measurement and test principles, and associated test equipment. Electronic Component level fault finding CADMID product lifecycle for test … High Voltage training/awareness. SAP Beneficial The department are keen to hear from candidates from a background with either RF/Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £36.00ph (Umbrella). Time and a quarter Overtime rate for hours worked over 37 hours Contract Duration: 12 Months (initially and then ongoing … and long-term thereafter) Development and Production Test Engineer Electronic/Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical More ❯

Mechanical Test Engineer Fixtures & FEA Location: Aldershot/Farnham (Hybrid) Duration: 6 Month rolling Rate: Competitive (Outside IR35) About the Role We are seeking a Mechanical Test Engineer to join our engineering team. The role will focus on the design and validation of vibration test fixtures, to ensure robust and reliable testing solutions for next … generation technologies. Key Responsibilities Design and develop vibration test fixtures and associated hardware for durability and qualification testing. Perform FEA to validate fixture strength, stiffness, and vibration performance. Support planning and execution of vibration, durability, and environmental test campaigns. Analyse and interpret test results, correlating with FEA outputs where appropriate. Produce clear technical documentation and validation reports. … Essential Skills & Experience Proven experience as a Test Engineer/Validation Engineer in automotive, aerospace, or related industries. Hands-on expertise in vibration test fixture design and build. Strong proficiency with FEA tools (e.g. ANSYS, Abaqus, SolidWorks Simulation). Good understanding of vibration, fatigue, and structural validation methods. Ability to work collaboratively across design, development, and More ❯

Production Test Engineer - Stevenage We are currently seeking an experienced Production Test Engineer to work for our major Defence client in Stevenage, UK. Role is required to be on site full time and inside IR35. SC clearance is required. Overview of department: As a Production Test Engineer - Electronics, you will play a vital role … of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast … paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level More ❯

Electrical Test Engineer Location: Haverhill, CB4 0AB Contract: 2-3 months Rate : Negotiable (Umbrella or PAYE) About the Role We are seeking an Electrical Test Engineer to support the reliability testing of advanced network cards in line with an agreed Reliability Test Plan. This is a hands-on role involving test setup, monitoring, troubleshooting … data collection, with work split between our onsite oven-testing facility and an external partner lab in Haverhill. The successful candidate will collaborate with engineers to design and validate test setups, check wiring and schematics, run regression tests, and execute scripted procedures across both Windows and Linux platforms. Due to the lab's location, applicants should have access to … their own transport. Key Responsibilities Set up and run reliability and regression tests on network cards. Operate and monitor environmental ovens (temperature/humidity cycling). Work with test scripts, wiring checks, and test automation across Linux and Windows platforms. Collect and analyse results in Excel, providing clear, accurate documentation. Collaborate with colleagues to ensure tests are executed More ❯

Test Engineer (Days) 1 position available Test Engineer (Nights) 1 position available + 20% shift allowance for night Term Temporary contract Rate - £Competitive Hours for day shift: Mon Thurs 6am to 4pm and Fri 6am to 12pm (days only) Hours for night shift: Monday Friday 15:00pm 02:00am Location: Burton on Trent Position Summary: The … Engines, Transmission, Powerpacks and Cooler Groups. The role will require familiarity with the operation of diesel engines, electrical and electronic control systems. Key Accountabilities/responsibilities: Installation into the test cells and testing of production power products in line with work instructions To ensure that products meet the testing requirements Ensure recording of accurate data to guarantee traceability Ensure More ❯

Production Test Engineer - Electronics Onsite - Stevenage 12 Month Contract Up to 36ph inside IR35 Overview of department: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience … to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including … supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test More ❯

Job Title: SC Cleared Test Engineer/Technician Location: Surrey (On-site, 5 days/week) Contract Length: 6 Months IR35 Status: Outside IR35 Start Date: ASAP Clearance: Current SC Clearance is essential We're looking for an experienced Test Engineer/Technician to join our team on a 6-month on-site contract based in … Surrey . This is an Outside IR35 role requiring current and valid SC clearance . Key Responsibilities: Execute formal test procedures and accurately document results Configure and test hardware, software, and firmware systems Operate lab/test equipment including: Digital Oscilloscopes Spectrum Analysers Function Generators Multimeters Power Supplies Identify and troubleshoot issues alongside engineering teams About You … Proven experience in a hands-on test engineering or technician role Comfortable working in a structured test environment Strong analytical and problem-solving skills Must hold current SC clearance If you're ready to start your next contract and meet the requirements, apply now with your CV and availability. More ❯

Test Engineer Design Engineer with Electronics/EMC background is required for a long term contract based in Stevenage Skillset/experience required: Skilled Hardware Design Engineers with proven experience to support the design, integration and validation of test system hardware solutions. Knowledge of test needs and techniques in support of product life cycle development. … Experience of Design Proving and performance testing during development. Experience of Environmental and EMC testing during qualification. Strong document writing skills associated with Test Equipment hardware design needs. Experience of managing packages of work is highly desirable. Overview of department: The Test Equipment Hardware Design Capability group is a function home to the engineers working as part of … the Test Equipment Centre of Excellence (TE CofEx), within Electronic Engineering (EE) Directorate. The EE Directorate is part of the wider Operations Directorate and forms part of Greater Engineering (Engineering, Operations and Programmes Directorate). Responsibilities Prepare specifications & develop designs in line with all quality and technical standards. Develop proposals for investigations & solutions, following investigation and analysis of technical More ❯

I'm recruiting on behalf of an electronics R&D business who operate in the power electronics/electric vehicle space. They're looking for a Senior Test Engineer to help test motors and motor controllers for use in various applications including agricultural, automotive, machinery etc. It's a mix of designing/developing tests, conducting tests … and presenting results to the R&D team. ROLE: Senior Electronic Test Engineer LOCATION: Ely, Cambridge (with remote) START: ASAP RATE: up to 430pd IR35: Outside Skills required for the role are: Electronics understanding Motors/motor controllers knowledge LabView Dynamometer testing The role can offer some remote working each week (max 2/3 days) but some More ❯

Software and Systems Test Engineer - 36349287 - £33.98/hr umbrella rate (Inside IR35) Are you ready to elevate your career and make a tangible impact in the automotive industry? This is your chance to join a forward-thinking company as a Software and Systems Test Engineer. This role offers the perfect blend of innovation, collaboration, and career … JIRA and Tableau. - Oversee testing activities and report overall status to development teams, promoting best practices. - Interpret complex datasets and ensure compliance with quality standards. - Foster collaboration and influence test engineers across the company to achieve reliable and compliant solutions. What You Will Bring: - Strong knowledge of process management and continuous improvement frameworks. - Proficiency in KPI tracking and reporting … testing and integration. - Analytical mindset with the ability to interpret and utilise complex data effectively. - Excellent organisational, documentation, and communication skills to influence stakeholders. As a Software and Systems Test Engineer, you will play a pivotal role in ensuring the successful integration of software and systems for new vehicle programmes. Your contributions will directly support the company's More ❯

Software and Systems Test Engineer - (phone number removed) - £33.98/hr umbrella rate (Inside IR35) Are you ready to elevate your career and make a tangible impact in the automotive industry? This is your chance to join a forward-thinking company as a Software and Systems Test Engineer. This role offers the perfect blend of innovation, collaboration … JIRA and Tableau. - Oversee testing activities and report overall status to development teams, promoting best practices. - Interpret complex datasets and ensure compliance with quality standards. - Foster collaboration and influence test engineers across the company to achieve reliable and compliant solutions. What You Will Bring: - Strong knowledge of process management and continuous improvement frameworks. - Proficiency in KPI tracking and reporting … testing and integration. - Analytical mindset with the ability to interpret and utilise complex data effectively. - Excellent organisational, documentation, and communication skills to influence stakeholders. As a Software and Systems Test Engineer, you will play a pivotal role in ensuring the successful integration of software and systems for new vehicle programmes. Your contributions will directly support the company's More ❯

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Test Operator/Electrical Test Engineer on an initial 12 month contract. Experience specifically required: Apprenticeship essential Significant electrical test experience required Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: 28.35ph and then after 12 weeks the rate is … 29.70ph Electrical Test Operator Job Description: The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular … the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. Carry out simple fault-finding procedures on electronic equipment. Keep test More ❯

Test Automation Engineer l Automation l Maestro l API l Mobile l React Native l Playwright l Typescript l integration l Python l £350-£375 PD l Outside IR35 l 3-6 months l London - Remote Method Resourcing are partnering with an exciting start up based in London in need of a Test automation engineer to … help with paving the way for a more test-driven environment and add best practices and frameworks across the platform. Core tech stack: Maestro Playwright React Native Typescript (Supertest) Integration testing using Python Key requirements: Assess the current environment and start building more tests in critical parts of the start where needed Highlight low coverage areas on critical paths … and help build a plan to tackle these increase the stability and confidence across the current test suites Be the gatekeeper for quality automation testing Contract: Outside IR35 3-6 month contract Remote however, has to be based in the UK £350-£375 per day Immediate start If you're interested in the role and would love more information More ❯

Position: (phone number removed) NVH Modal test engineer Location: Gaydon Position Type: Contract 7 month rolling Inside IR35 Salary: 27.21 per hour umbrella inside IR35 I am currently recruiting on behalf of a Luxury Automotive OEM based in Gaydon who are seeking a NVH Modal test engineer to join their team on a long term rolling More ❯

Our large defence client is seeking a skilled Test Development Engineer to join their Test Equipment Design team in Stevenage. This contract role offers a unique opportunity to work on innovative projects, developing and maintaining automated test systems within an established team. Key Responsibilities: Develop and implement test strategies, with an emphasis on 'Design for … Test' where appropriate. Create test strategy documents and design Interchangeable Test Adaptors, including both mechanical and electrical elements. Develop software for automated test sequences in accordance with test specifications. Engage in continuous improvement activities and the development of new technologies. Job Requirements: Experience in creating and maintaining automated test systems. Strong understanding and interpretation … of technical requirements and drawings. Contemporary working knowledge of electronics. Understanding of modern test techniques/methodologies such as ICT, Functional Test, and Boundary Scan. Experience in measurement system design, including instrument applicability and power distribution/grounding. Strong analytical and problem-solving skills. Experience in using NI LabVIEW and/or TestStand is preferable. Experience in Boundary More ❯

Principal Test Equipment Engineer Edinburgh - 90% onsite 12 months Job Description The Opportunity: Are you interested in developing test equipment for some of the most cutting-edge defence and aerospace projects in the UK? If you like the sound of developing test equipment for projects such as the SAAB Gripen jet, then our client would like … to hear from you. We are looking for an experienced Principal Test Equipment Engineer to join the development team on a complex Automatic Test Equipment system within Product & MRO Services of the Customer Support Services Solutions (CS3) at our Edinburgh based site. You will be required to work within a multi-disciplined engineering team in the delivery … project. The successful candidate will be involved in a wide variety of engineering activities including, but not limited to, involvement with the design and development of solutions for Automatic Test Equipment systems, integration testing, qualification, certification and customer acceptance. This will involve liaison with internal/external customers, other functions within the Integrated Project Team (IPT) and engineering sub More ❯