1 to 25 of 46 Permanent EMC Jobs in the East of England

environment A BEng in Electronics Engineering or equivalent Strong circuit design and troubleshooting experience Experience with PCB design and development Knowledge of sensors, RF, EMC/EMI and CAN/CAN FD A hands-on approach to engineering and problem solving Excellent technical documentation and communication skills Experience with ...

design tools and lab equipment Familiarity with embedded systems and interfaces (e.g., SPI, I2C, UART, CANbus high-speed buses). Understanding of signal integrity, EMC and approvals testing RF/Microwave knowledge desirable This role is hybrid and located on the outskirts of Saffron Walden/Cambridge TPBN1_UKTJ ...

take the next step in your career, where you can work on varied and interesting projects, with extensive in-house resources (prototype PCB manufacture, EMC emissions test facility, custom anechoic test chamber, and prototype mechanical workshop). There may be additional opportunities over time to take on aspects ...

validation activities. Support board-level bring-up, debugging and fault investigation. Collaborate with cross-functional engineering teams across the product lifecycle. Support environmental, EMC and qualification testing. Produce technical documentation and engineering evidence to support programme delivery. Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen ...

least 2 of the following areas: RF Tx/Rx architectures RF transmitters and receivers RF Power Amplifiers Frequency Generation (VCO) Matching networks EMC/EMI Broadband communication systems Tools & Engineering Methods RF simulation tools and modelling such as ADS, CST, or equivalents RF (circuit and system) testing procedures ...

validation activities. Support board-level bring-up, debugging and fault investigation. Collaborate with cross-functional engineering teams across the product lifecycle. Support environmental, EMC and qualification testing. Produce technical documentation and engineering evidence to support programme delivery. Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen ...

Practical expertise in hardware bring‐up, debug, test and verification.Ability to interpret and derive hardware designs from system‐level requirements.Strong understanding of Design for EMC/EMI in demanding environments.Experience integrating hardware, firmware and software into working platforms.Comfortable working within a structured hardware development lifecycle and configuration‐controlled environment.Valuable ...

circuits PCB design and schematic capture experience Embedded C and/or C++ programming for microcontrollers Experience debugging and testing embedded systems Understanding of EMC principles and compliance requirements Experience with communication protocols such as DMX512, RDM or sACN would be advantageous Degree, HNC or HND in Electronics Engineering ...

least 2 of the following areas: RF Tx/Rx architectures RF receivers & transmitters RF power amplifiers Frequency generation (VCO) Matching networks EMC/EMI Tools & Engineering Methods Component selection and evaluation skills Experience using RF simulation and modelling tools such as ADS, CST, or equivalent Familiarity with ...

programming languages. Aerospace electronics design, development, and qualification. Worst‐case circuit analysis, failure method and criticality analyses, and reliability analysis. Antenna design. EMI/EMC design and mitigation techniques. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate ...

analytical abilities Proven mentoring and leadership of team members. Core RF Expertise RF Tx/Rx architectures RF receivers and transmitters RF power amplifiers EMC/EMI Frequency generators (VCO) Awareness of Antenna design & tuning Tools & Methods Understand and can mentor in RF simulation and modelling tools such ...

instrumentation and electronic system development . Desirable Skills FPGA development, Verilog and FPGA development toolchains. Embedded C/C++ and Python. CE compliance, EMC testing and product safety . PCB design using KiCad or similar CAD packages . Experience with USB, CAN or similar communication interfaces . Hardware integration ...

design tools and lab equipment Familiarity with embedded systems and interfaces (e.g., SPI, I2C, UART, CANbus high-speed buses). Understanding of signal integrity, EMC and approvals testing This role is hybrid and based near Saffron Walden/Cambridge ...

design tools and lab equipment Familiarity with embedded systems and interfaces (e.g., SPI, I2C, UART, CANbus high-speed buses). Understanding of signal integrity, EMC and approvals testing This role is based near Saffron Walden/Cambridge. ...

design tools and lab equipment Familiarity with embedded systems and interfaces (e.g., SPI, I2C, UART, CANbus, high-speed buses). Understanding of signal integrity, EMC and approvals testing This role is hybrid requiring three days per week onsite. This role is not a self-employed opportunity. ...

designs Microcontroller development and efficient low‐power design techniques Board bring‐up and verification of inter‐device interfaces (e.g., signal‐integrity analysis) Design for EMC, safety and regulatory standards ECAD systems – ideally Altium Design of security products Desired Skills C or Rust development for microcontrollers U‐boot and Linux ...

development lifecycle: concept, architecture, design, verification, compliance, release, and continuous improvement. Contribute to requirements definition, hazard analysis, and design risk assessments. Ensure adherence to EMC, safety, and regulatory standards relevant to scientific instrumentation and automation. Support the transition to manufacturing, including design for manufacture/test, supplier engagement ...

design, integration and test. Valid UK Driving License Beneficial Radar, Radio System, communications protocols systems and bid proposal knowledge. Naval Platform, Navigation equipment electronics EMC, ESD skills. This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems. ...

deliveries and coordinating inputs across stakeholdersWhat you'll bringExperience in electronics hardware and/or testFamiliarity with development/qualification test activities (performance, environmental, EMC beneficial)Strong written communication and a structured approach to problem-solvingEligibility/security Nationality and security restrictions apply. Baseline UK security checks (BPSS) required ...

Proven experience in hardware design and development with proficiency in Altium Designer. Expertise in high-speed signal design, RF, power management, and EMI/EMC considerations. Strong debugging skills with hands-on experience using lab equipment. Knowledge of FPGA design (VHDL/Verilog) or microcontroller-based systems, with ...

environment. Knowledge of FPGA-based systems, RF electronics or signal processing hardware. Experience with DO-254, IEC 61508, DEF STAN or similar standards. Environmental & EMC qualification to military standards. What We Offer Competitive compensation and stock options Private Medical & Dental Cycle to work scheme Lunchtime catering on site About ...

FPGAs & SoCs microcontroller development and efficient low power design techniquesboard bring-up and verification of inter device interfaces (e.g. signal integrity analysis)design for EMC, safety and regulatory standardsECAD systems – ideally Altiumdesign of security productsThe following skills would also be helpful in the role: C or Rust development ...

digital, analogue and mixed-signal electronics for battery-powered IoT devices, select components, and lead prototype bring-up and debugging, while ensuring EMI/EMC and regulatory compliance. #J-18808-Ljbffr ...

Analogue circuit design experience. Familiarity with PCB design tools. Knowledge of Embedded systems and interfaces such as SPI, 12C, CANbus, UART. An appreciation of EMC, and signal integrity. You will also have the opportunity to get involved with Microwave RF systems. This Electronics Engineer role will stretch and broaden ...

experience Aerospace, defence, missile, radar, UAV or space industry experience FPGA-based systems experience RF electronics or signal processing hardware knowledge Environmental and EMC qualification experience Embedded software skills for board bring-up and debugging ...