Barrow-In-Furness, Cumbria, North West, United Kingdom
JAM Recruitment Ltd
defense-related industry. Proficiency with PLC programming languages, such as ladder logic and structured text. Familiarity with industrial communication protocols, including Modbus, Profibus, and Ethernet/IP. Strong problem-solving skills and attention to detail. Excellent communication and collaboration skills, with the ability to work effectively in a team environment. more »
the following areas: Technical problem troubleshooting Performance troubleshooting for compute, network or storage bottlenecks A solid grasp of IP and subnetting An understanding of ethernet, switching, cabling and patching. Experience in an environment where security and network protection are key Installation, configuration or administration of: Windows Servers Linux Servers Vmware more »
Oxfordshire, South East, United Kingdom Hybrid / WFH Options
CMR & Life Sciences
design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way more »
Bristol, City of Bristol, United Kingdom Hybrid / WFH Options
Judge Recruitment
Switches, HPE Servers, Wired & WiFi networks, UPS + server peripherals of any kind Domains: Domain names, SSLs, DNS + nameservers Connectivity: Leased lines + ethernet, FTTC/SoGEA/FTTP. As a 3rd Line IT Engineer, you will be a fundamental part of the Service Desk Team, focusing on the more »
Employment Type: Permanent
Salary: £40000/annum +Bonus+Benefits+Hybrid working
Service (QoS) and VLAN configuration experience of fibre networks and knowledge of fibre transmission concepts and technologies hands-on experience in TCP/IP Ethernet networking, including managing and configuring Layer 2 and Layer 3 network switches and routers to be considered for the higher salary band, you should have more »
Milton Keynes, Buckinghamshire, South East, United Kingdom Hybrid / WFH Options
ASPIRECOM LIMITED
and Nokia SR OS skills would be ideal although Juniper or Nokia individually is good. Excellent understanding of layer 2 and 3 technologies including Ethernet, MPLS,IS-IS, QoS, BGP, and TCP/IP. An excellent role in an expanding and successful network service provider. NRSII JNCIP more »
City Of Bristol, England, United Kingdom Hybrid / WFH Options
Wave Recruitment
Motivated & High standards Embedded Linux/ZephyrOS/FreeRTOS STM32/NXP i.MXRT/ARM M4, M7, A53, etc USB principals and peripheral drivers Ethernet principals and peripheral drivers Emscripten for running C++ applications in the browser If you have an interest in digital audio and/or layer more »
and guidance. Experience & Skills required for the Electronic Design Engineer, Southampton: - Proven experience with computing architectures: PC-X86 or ARM - Experience with PCIe, USB, Ethernet, HDMI - Experience with Microsoft Windows Embedded and Linux porting. - It would be ideal to have knowledge of FPGAs - Understanding of EMC requirements and design constraints. more »
St. Neots, Cambridgeshire, East Anglia, United Kingdom
NES Fircroft
project experience working with Safety Instrumented Systems (SIS) Good understanding of OT Cyber Security requirements (IEC 62443) Experience with modification/configuration of industrial ethernet networks, including switches, routers and/or firewalls Experience with modification/configuration of Windows operating systems for OT environments (Workgroup or Windows Active Directory more »
s network applications Experience using PCIe, CXL, RDMA, DDR4, bare metal use of high-speed I/O like GTM and F-Tile transceivers, Ethernet, IP Experience in PCIe driver development Comprehensive understanding of clock domain crossing techniques Strong knowledge of FPGA tool flows (synthesis, partitioning, place&route, timing analysis more »
Nottingham, Nottinghamshire, East Midlands, United Kingdom
Blackburn Starling
budgetary responsibilities. PLC and HMIsoftware development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols; EtherNet/IP, PROFINET, PROFIBUS DP and PA, Modbus TCP/IP Experience working with SCADA systems Knowledge and experience in virtual machines (VMWare) Good planning more »
at 30 hours per week. Working under the supervision of Practice Leader – Service Provider Enterprise & Wholesale, researches the market for enterprise network infrastructure, including Ethernet switches, access routers, and Wi-Fi equipment. Produces reports, forecasts, presentations, and opinion pieces on market and commercial opportunities for vendors and service providers. In more »
in firmware testing methods The below is a benefit: - C Programming - Knowledge of IP networks & Wireshark - Interface protocol experience (DDR3/4, PCIe & 100G Ethernet) This is a Hybrid Inside IR35 position, offering a 3 on-site 2 remote split. You must be OK with this commitment to be considered more »
designing switch mode power supplies Knowledge of hardware interfaces Component level test and fault finding Electronic circuit building and basic wiring Desirables: Embedded programming Ethernet hardware and protocols RTOS **** INTERVIEW IMMEDIATELY - FAST OFFER **** Role: Electronic Engineer Salary: up to £50,000 Location: Kent In Technology Group Ltd is acting as more »
mission critical environments. in-depth knowledge of EPMS, BCMS, PLC, BAS, and BMS. Good knowledge of open BAS protocols and communications - BACnet, LON, MODBUS, Ethernet, Web-Services, and HTML. Strong experience with the operation and maintenance of building cooling and related mechanical systems. In-depth knowledge of server platforms, virtualisation more »
in firmware testing methods The below is a benefit: - C Programming - Knowledge of IP networks & Wireshark - Interface protocol experience (DDR3/4, PCIe & 100G Ethernet) This is a Hybrid Inside IR35 position, offering a 3 on-site 2 remote split. You must be OK with this commitment to be considered more »
in firmware testing methods The below is a benefit: - C Programming - Knowledge of IP networks & Wireshark - Interface protocol experience (DDR3/4, PCIe & 100G Ethernet) This is a Hybrid Inside IR35 position, offering a 3 on-site 2 remote split. You must be OK with this commitment to be considered more »
in firmware testing methods The below is a benefit: - C Programming - Knowledge of IP networks & Wireshark - Interface protocol experience (DDR3/4, PCIe & 100G Ethernet) This is a Hybrid Inside IR35 position, offering a 3 on-site 2 remote split. You must be OK with this commitment to be considered more »
Milton Keynes, Buckinghamshire, South East, United Kingdom
RE&M
Experience to plan and manage projects Technical product support experience Experience of delivering technical training Experience with some industrial communication protocols for example PROFINET, EtherNet/IP, EtherCAT and IO-Link Experience with some PLC engineering tools: Tia Portal, TwinCAT and Studio more »
experience of leading and owning the design of electronic systems High speed digital design High speed digital design interfaces: USB3, MIPI, PCI express, Gigabit ethernet, DDRX memory High Speed PCB layout and design constraints definition Experience designing for signal and power integrity. Experience with simulation tools (e.g. Hyperlynx, Sigrity, ADS more »
Youll be involved in Design & Redesign of new and updated LED, Passenger information, controllers, new sign processor projects, the roll out of new Smart Ethernet based TFT systems & component obsolescence Part of all stages of the standardised V diagram within R&D, including the creation of rapid prototypes, testing, compliance more »
electronic devices. Knowledge of hardware and software development processes. Project management experience. Knowledge of vehicle communication protocols such as CAN and Ethernet. CAN and Ethernet analysis tools (e.g. CANalyser) and vehicle diagnostics. Knowledge of database management tool (such as MS Access) and some programming knowledge would be beneficial. Experience in more »
testing. . Technical: Experience with programming of Siemens and Rockwell PLCs. Experience developing PLC software from P&IDs and descriptions from scratch. Experience with Ethernet PLC to PLC and PLC to SCADA communications. Experience of Profibus, Profinet, AS-I and IO link networks Experience with SCADA systems connected to multiple more »
