1 to 25 of 97 DO-254 Jobs in England

Derivation of detailed FPGA / Firmware requirements and architecture from system requirements. A structured approach to FPGA / firmware design (RTCA DO-254 or similar). Cryptography and anti-tamper techniques. Artificial Intelligence including machine learning and genetic algorithms. Electronics test methods and equipment. Good More ❯

Derive detailed Firmware requirements and architecture from system requirements. Apply a structured approach to firmware design following standards such as RTCA DO-254 or similar. Employ cryptography and anti-tamper techniques. Incorporate Artificial Intelligence, machine learning, and genetic algorithms into designs. Use various electronics test More ❯

Desirable Awareness of Defence Standards and Industry standards for example IEC 61508 / 61511, ARP 4754, DO-178C / DO-254 Be a chartered engineer or working towards this level Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave More ❯

FPGA design and embedded systems. Knowledge of high-speed digital design, power electronics, and RF circuits. Familiarity with industry standards such as DO-254, MIL-STD, and ECSS. Experience with hardware testing, debugging, and environmental qualification processes. Strong problem-solving skills and ability to work in More ❯

FPGA design and embedded systems. Knowledge of high-speed digital design, power electronics, and RF circuits. Familiarity with industry standards such as DO-254, MIL-STD, and ECSS. Experience with hardware testing, debugging, and environmental qualification processes. Strong problem-solving skills and ability to work in More ❯

in writing technical reports / documentation Desirable Development of real-time, embedded, safety-critical firmware, preferably in accordance with RTCA / DO-254 DAL D Independent verification using SystemVerilog / UVM Relevant experience in the Aerospace or Defence industry Experience of embedded processor cores (e.g. More ❯

detailed firmware requirements. A methodical approach to the full firmware design lifecycle, working to a structured firmware process such as RTCA DO-254 or similar. Experience of debugging firmware designs and supporting verification and integration at hardware and system level alongside Software and Electronic Engineers. More ❯

CAN, Ethernet, SPI, I2C, ARINC. Experience with requirements management. Experience with functional safety, aircraft or automotive standards: DO-178, DO-254, ARP 4754, ARP 4761 and DO-160 ISO 26262 IEC 61508 and / or derived requirements What can you More ❯

simulation industry. Proven experience in managing requirements and system design for complex, real-time systems. Familiarity with DO-178C, DO-254, ARP4754A, or equivalent aerospace standards is highly desirable. Experience with system engineering tools (e.g., IBM DOORS, Cameo Systems Modeler, MATLAB / Simulink More ❯

simulation industry. Proven experience in managing requirements and system design for complex, real-time systems. Familiarity with DO-178C, DO-254, ARP4754A, or equivalent aerospace standards is highly desirable. Experience with system engineering tools (e.g., IBM DOORS, Cameo Systems Modeler, MATLAB / Simulink More ❯

detailed Firmware requirements. A methodical approach to the full firmware design lifecycle, working to a structured firmware process such as RTCA DO-254 or similar. Experience of working on safety related firmware to IEC 61508 would be advantageous. De-bugging firmware designs and supporting verification More ❯

in writing technical reports / documentation Desirable Development of real-time, embedded, safety-critical FPGA, preferably in accordance with RTCA / DO-254 DAL A / B or below Electronic Warfare or RF Systems Experience Defence domain experience or relevant experience in the Aerospace industry More ❯

work. DESIRABLES Awareness of Defence Standards and Industry standards for example: IEC 61508 / 61511 ARP 4754 DO-178C DO-254 More ❯

for example Def Stan 00-56, Def Stan 00-55, IEC 61508 / 61511, ARP 4754, DO-178C / DO-254 • Awareness of Mathworks toolsets, particularly in the development of control system models • Experience of Acceptance testing and accreditation of safety critical systems More ❯

estimation Competence in both analogue and digital hardware design modifications Practical experience with system-level hardware commissioning Understanding of RTCA / DO-254 development processes (preferred) Working Conditions: Onsite Requirement: Presence in Hastings is required; hybrid work model available after initial ramp-up Security Clearance More ❯

primary technical interface for customers, suppliers, and internal teams. Ensure compliance with aerospace standards including ARP4754A, ARP4761, DO-178C, DO-254, and DO-160G. Support certification planning, risk management, and cross-functional design assurance. What Were Looking For Senior Systems More ❯

experience in embedded systems, digital and analogue design. Familiar with small Microprocessor and microcontroller systems. Familiar with avionics and defence standards, e.g. DO-254, MIL-STD-704, MIL-HDBK-217F, ARINC 429, would be an advantage. Familiar with Op Amp level analogue & DC-DC PSU design. More ❯

for example Def Stan 00-56, Def Stan 00-55, IEC 61508 / 61511, ARP 4754, DO-178C / DO-254 Awareness of Mathworks toolsets, particularly in the development of control system models Experience of Acceptance testing and accreditation of safety critical systems More ❯

stakeholders and technical teams alike. Methodologies & Tools: Familiarity with Agile / Scrum, V model, ISO 9001, DO 178C / DO 254 or equivalent standards. Comfortable with project tools such as JIRA, MS Project Primavera P6 or similar. People Source Consulting Ltd is acting More ❯

stakeholders and technical teams alike. Methodologies & Tools: Familiarity with Agile / Scrum, V-model, ISO 9001, DO-178C / DO-254 or equivalent standards. Comfortable with project tools such as JIRA, MS Project Primavera P6 or similar. People Source Consulting Ltd is acting More ❯

family of microprocessors • Knowledge with designs using MEMS sensors • Knowledge with designs using Optical sensors or Optical displays. • Awareness of RTCA DO-254 (EUROCAE ED-80) & RTCA DO-160 (EUROCAE ED-14) • Awareness of Avionic data buses More ❯

Software. You will require the following: Knowledge of MS Office tools Working knowledge of ISO 9001, preferably also AS9100 Also: Experience of DO-254 & DO178C Design Assurance is desirable due to the nature of the programmes. Professional registration as a Chartered member of the Quality Institute More ❯

sectors, following Ultra s processes. Design PCB layouts for analogue, RF, digital, power, high-speed and highly reliable circuits in accordance with DO-254 if required. Design PCB layouts considering security, EMC and TEMPEST implications and rules. With input from Production Test, incorporate test points in More ❯

sectors, following Ultra’s processes. Design PCB layouts for analogue, RF, digital, power, high-speed and highly reliable circuits in accordance with DO-254 if required. Design PCB layouts considering security, EMC and TEMPEST implications and rules. With input from Production Test, incorporate test points in More ❯

analyzers, etc.) Hardware design and verification against requirements Experience with requirements capture, work package definition, and estimation Familiarity with RTCA / DO-254 development guidelines (preferred) Additional Information: Security Clearance: Active SC Clearance is a prerequisite for this role Hybrid Working: Onsite presence required in More ❯