1 to 25 of 29 RS-485 Jobs in the UK excluding London

validate industrial communication protocols: Modbus (RTU/TCP), CAN/CANopen/J1939, Ethernet/IP, PROFINET, OPC UA, RS-232/RS-485 Apply functional safety practices in line with IEC 61508/IEC 62061, including SIL determination, Safety Requirements Specifications (SRS), HARA/FTA/FMEA ...

approach. Desirable Experience: STM32 or ARM Cortex-M devices. PCB design or PCB design review. Low-power and battery-powered products. Industrial communications (CAN, RS485, Modbus, LoRa, Bluetooth, etc.). Product verification and validation. Requirements capture and systems engineering. Prototype development. Design for Manufacture (DFM) and Design for Test ...

using NVIDIA Jetson or similar AI computing platforms. Wireless communications such as Bluetooth, WLAN, cellular, low-power radio. Wired communications such as CAN, RS232, RS485, SPI and I2C. Real-time signal conditioning and filtering. Low-power or battery-powered systems. Experience of medical device development and the IEC 62304 software ...

less experienced engineers where appropriate. Experience Required: Strong experience in C programming for bare-metal embedded systems. Experience with communication protocols such as SPI, RS485, and CAN. Strong knowledge of ARM architectures, such as Cortex-M or Cortex-A. Experience developing, debugging, and integrating embedded firmware. Good understanding of embedded ...

Development of microcontroller-based systems • Working with ARM Cortex, PIC and similar embedded platforms • Design and development of communication interfaces including SPI, I2C, RS232, RS485 and Ethernet • Hardware and firmware debugging, testing and validation • Supporting power electronic designs including DC-DC converters and constant current circuits • EMC-conscious product design ...

Development of microcontroller-based systems • Working with ARM Cortex, PIC and similar embedded platforms • Design and development of communication interfaces including SPI, I2C, RS232, RS485 and Ethernet • Hardware and firmware debugging, testing and validation • Supporting power electronic designs including DC-DC converters and constant current circuits • EMC-conscious product design ...

attitude. Experience in the use of laboratory equipment (oscilloscope, logic analyzer, signal generators). Experience with peripheral standards and communication protocols (I2C, SPI, UART, RS485, RS232, RGMII, ecc.). Familiarity with scripting languages (e.g., Bash, Python). Proficiency in source code revision control, especially GIT. Fluent English communication skills, both ...

Circuit Design/Signal Conditioning/Filtering/Data Acquisition/Embedded C/C++/Microcontrollers/SoC/Ethernet/RS232/RS485/SPI/I2C/DFT Experience across the complete hardware lifecycle, including taking PCB designs through to production and developing test and validation systems ...

multi-axis motion-control systems. MATLAB/Simulink or Python-based control and simulation tools. Interfaces such as CAN, SPI, I2C, UART/RS-485 or Ethernet. ROS 2, ros2_control, CANopen/CiA 402 or EtherCAT. ...

attitude. Experience in the use of laboratory equipment (oscilloscope, logic analyzer, signal generators). Experience with peripheral standards and communication protocols (I2C, SPI, UART, RS485, RS232, RGMII, etc.). Familiarity with scripting languages (e.g. Bash, Python). Proficiency in source code revision control, especially GIT. Knowledge of agile methodologies. Fluent ...

multimeters.• Possesses solid prototyping abilities (soldering, wiring, mechanical), strong documentation and writing skills, and a good working knowledge of communication interfaces including CAN, RS232, RS485, SPI, I2C, USB, and Ethernet.What we offerWe’re passionate about providing amazing opportunities and benefits, so you can continue and progress a lifelong career with ...

desirable) electrical regulations and standards. Experience with electrical CAD software, ideally EPLAN. Knowledge of EMC compliance, machine safety and industrial communications (RS232, RS485, USB, Ethernet). Excellent communication skills with the ability to work independently and as part of a team. Desirable Experience within the life sciences or regulated manufacturing ...

layout design practices (matched impedance, stack up and manufacturing restrictions) and experience using SI tools.Experience with digital communication interfaces (I2C, SPI, CAN, UART, USB, RS485, RS422, SpaceWire, PCIe, Gbit Ethernet).Experience with Rigid, Flex and Rigid-Flex PCB design.Strong debugging experience and fault identification.Experience with lab equipment including oscilloscopes, logic ...

design practices (matched impedance, stack up and manufacturing restrictions) and experience using SI tools. Experience with digital communication interfaces (I2C, SPI, CAN, UART, USB, RS485, RS422, SpaceWire, PCIe, Gbit Ethernet).Experience with Rigid, Flex and Rigid-Flex PCB design. Strong debugging experience and fault identification. Experience with lab equipment including ...

Switched Mode Power Supply design Experience with 8, 16, 32 & 64-bit microprocessors EMC testing & design Programming experience or awareness Version control CAN, Ethernet, RS485 & USB CAN/Ethernet diagnostics Experience working across multiple clients/projects Signal Integrity & Power Integrity knowledge Experience designing to recognised standards/regulations Experience ...

computers, power distribution units (PDUs), and sensor interfaces. Avionics Bus Integration: Implement robust, low-latency communication bus architectures, including CAN/CAN FD, RS422, RS485, Ethernet, SPI, and I2C. Power Electronics: Design low-voltage DC-DC converters, switching regulators, and power distribution circuitry optimized for weight, thermal dissipation, and efficiency. ...

Strong analogue electronics design and circuit simulation expertise. Proven ability to lead technical activities and influence engineering decisions. Experience with communication protocols such as RS485, SPI, I2C, CAN, or similar. Strong understanding of component selection, derating, reliability, and lifecycle considerations. Experience producing and reviewing schematics and technical documentation. Understanding ...

strong background in Mixed Analogue and Digital Design with Micro-controllers, Schematic Capture (ideally in Altium) and understand communications protocols such as CAN, Ethernet, RS485, USB, CAN/Ethernet Diagnostics. APPLY NOW for the Senior Electronics Engineer for our client based in Luton, Bedfordshire role please send your ...

Integrity & Testing: Awareness of Signal/Power Integrity (SI/PI) in high-speed designs; strong grasp of EMC testing. Comms Protocols: CAN, Ethernet, RS485, USB. ...

control theory and control concepts. Knowledge of automation systems, HVAC, electrical and building operations. Proven analytical and troubleshooting skills Setting up Ethernet and RS485 network infrastructure (routers, switches) Setting up BacNet and Lon network infrastructure Working experience with Windows 7, 10, MS Server and MS Office software including Excel, Access ...

LVAC board cabling. Carry out relay room works: HV/LV relay panel internal wiring, wall-box terminations and trunking, glanding and terminating multicores, RS485 and 10-pair communications cabling, and fuse-carrier replacement. Support the commissioning engineer through functional, NER, VT, isolator, CB, relay secondary injection, control panel ...

deploying software for Embedded Linux devices using frameworks such as Yocto and Buildroot Working with embedded and industrial hardware protocols and interfaces, including RS485, Modbus, and CAN, for communication between internal and external components Designing and implementing on-device software for remote control, interrogation, and debugging of deployed chargers, including … with experience building and deploying software for Embedded Linux devices (for example Yocto or Buildroot) Familiarity with embedded and industrial hardware protocols such as RS485, Modbus, and CAN Awareness of low-level charging standards such as CCS (Combined Charging System) and ISO 15118, which govern the physical and data link ...

Job Title: German-Speaking Technical Engineer Location: Lewes, East Sussex, UK, with regular travel to Wuppertal and customer sites across Germany Salary: £55,000–£65,000 DOE Working Pattern: UK-based, predominantly onsite in Lewes ...

This is what you’ll actually do!As Automation Engineer, you’ll take ownership of all site PLC platforms, primarily Allen Bradley ControlLogix and CompactLogix, while also supporting Siemens, Omron, and Mitsubishi systems where required. ...

Gaming:Welcome to the world of land-based gaming. At Light & Wonder, it’s all about the games, and our Gaming team builds cutting-edge technology, products, and content for the most iconic casinos and ...