Wetherby, West Yorkshire, Yorkshire, United Kingdom Hybrid / WFH Options
Samuel Frank
the customers regulatory requirements Communicate accurate project status to the Software Manager, internal and external customers and suppliers Networking of common automation hardware including EtherNET/IP, ProfiNET, Profibus, Modbus You must be eligible to work in the UK without sponsorship Machine safety knowledge e.g. BS EN ISO 13849 MS more »
Oxfordshire, South East, United Kingdom Hybrid / WFH Options
CMR & Life Sciences
design life cycle management Experience in complete board design with 32-bit microcontrollers (STM32 preferred) Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred Experience with functional safety systems Board bring-up, verification, and testing of designs, all the way more »
Cell electrical systems and powertrains A working understanding of High Voltage standards and practice Understanding of broader in-vehicle network technologies including: LIN, Flexray, Ethernet Familiarity with Matlab/Simulink Competent user of ETAS INCA and/or Vector toolsuite (CANalyzer/CANape/CANoe) E-CAD systems: Siemens Essentials more »
including xDSL services via BT WBMC and SHDSL over copper pilot cables Understanding of deployment and testing of 3rdparty leased line products including Openreach Ethernet Access Direct and Optical Spectrum Access Understanding of Layer 2 & Layer 3 networking including Cisco Aggregation Services Router\Switches and Cisco Industrial Ethernet and Connected more »
Middlesbrough, North Yorkshire, North East, United Kingdom
Reed Technology
Semaphores) Interrupts, clock systems and interfacing with memory mapped peripherals Using and writing drivers for common MCU interfaces (e.g. GPIO, USART, SPI, I2C, USB, Ethernet) Reading electronic schematics and component datasheets Desirable experience : 32-bit ARM Cortex-M3, M4F, M7 MCUs from Microchip FreeRTOS Git version control Complying with MISRA … C Industrial protocols such as Modbus, HART, Foundation Fieldbus, Profibus Ethernet protocols such as HTTP, NTP Troubleshooting using standard lab equipment (e.g. oscilloscope, logic analyser) Testing (unit, integration and system) Agile development methodologies EDA tools (e.g. Altium) Functional Safety (IEC 61508) lifecycles Electronics engineering or computer science degree or other more »
Newbury, Berkshire, South East, United Kingdom Hybrid / WFH Options
Netteam tX Ltd
etc. Good working knowledge of line protocols, including ISDN/PRI, DID/DNIS, VoIP, SIP, 1DM, Analog, 1.38, DS1/DS3, Metro Over Ethernet, MPLS and Broadband Experience of working with Watchguard, Fortigate and Meraki firewalls Have a versatile approach to new technologies and be able to demonstrate learning more »
Exsel Electronics are currently seeking to fill a number of Software Engineering roles. A minimum of 2 years commercial or academic programming. General Purpose of the Role The purpose of this role is to be a key part of a more »
within a team and with cross-functional departments (e.g., Design, Quality Assurance, Manufacturing). Other Useful Experience Knowledge of industrial communication protocols (e.g. Profinet, Ethernet/IP, Ethercat). Experience with software tools used in automation (e.g., Siemens TIA Portal, Rockwell Automation Studio 5000). Proficiency in using diagnostic and more »
Oxfordshire, South East, United Kingdom Hybrid / WFH Options
CMR & Life Sciences
cycle management. Experience in complete board design with 32-bit micro-controllers (STM32 preferred). Experience with low-level interfaces such as SPI, CAN, Ethernet, EtherCAT, etc. Schematic and board design software - Altium preferred. Experience with functional safety systems. Board bring-up, verification and testing of designs, all the way more »
St. Neots, Cambridgeshire, East Anglia, United Kingdom Hybrid / WFH Options
NES Fircroft
project experience working with Safety Instrumented Systems (SIS) Good understanding of OT Cyber Security requirements (IEC 62443) Experience with modification/configuration of industrial ethernet networks, including switches, routers and/or firewalls Experience with modification/configuration of Windows operating systems for OT environments (Workgroup or Windows Active Directory more »
role in driving the development and success of our cutting-edge Connectivity products and services. These offerings encompass a wide range, including Broadband Services, Ethernet & Leased Line solutions, and multi-site networking technologies like MPLS & SD WAN. Your responsibilities will span the entire lifecycle of these products, from initial introduction more »
in electrical and electronics as well as software and computer systems Electrical and mechanical practical skills Digital electronics knowledge knowledge of networking principles desirable (Ethernet and fibre optics) Will be required to travel when necessary potentially at short notice including to remote offshore locations (offshore training will be provided if more »
Towcester, Northamptonshire, East Midlands, United Kingdom Hybrid / WFH Options
The Recruitment Bureau (Kent) Ltd
AVR, LoRa) Expertise in debugging and improving complex software systems Experience interfacing with embedded hardware using protocols such as UART, I2C, SPI, RS232, USB, Ethernet Experience with designing, developing and verifying electronic schematics advantageous Experience with IoT and LoRa would be advantageous The Senior Firmware Development Engineer role requires the more »
two sites will be required. Knowledge of Microsoft Operating Systems (both desktop and server based) Understanding of Local Area Networking experience (TCP/IP, Ethernet) Basic IT troubleshooting skills An understanding of hardware, software, networks, and systems. Ability to diagnose and resolve technical problems under pressure. Clear communication, patience, and more »
Nottingham, Nottinghamshire, East Midlands, United Kingdom
Blackburn Starling
budgetary responsibilities. PLC and HMIsoftware development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider. Experience with multiple communication protocols; EtherNet/IP, PROFINET, PROFIBUS DP and PA, Modbus TCP/IP Experience working with SCADA systems Knowledge and experience in virtual machines (VMWare) Good planning more »
As an FPGA Engineer you will work within our Critical Solutions team where you will create new, complex FPGA designs and enhance custom FPGA IP cores in VHDL, including simulation, synthesis, timing analysis and testing in hardware. You will be more »
charger and telecoms equipment installation & commissioning to an excellent standard Performing Industry standard testing as required on telecoms and antenna systems e.g. BERT (E1 & Ethernet), RF sweeps, PIM, TDR, OTDR & OSCAR tests Wiring and connection of DC power to telecoms equipment to required standards and regulations 1st Line Support and more »
Employment Type: Permanent
Salary: 4% Matched pension, Health cash plan, Life assurance, 33 Holidays
Newcastle Upon Tyne, Tyne and Wear, North East, United Kingdom Hybrid / WFH Options
Reed Technology
Continuous Integration and Continuous Delivery (Ideally using Azure DevOps) Design for testability, TDD and Unit testing frameworks (Google Test) Communication protocols (UART, I2C, SPI, Ethernet, CAN) Real-time motor control system software Writing scripts in Python for automated tests and tools Development using Visual Studio Code Reading electronic schematics and more »
Stevenage, Hertfordshire, South East, United Kingdom
Guidant Global
Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes What you'll get to do as a Software Engineer C++: This job involves more »
Employment Type: Contract
Rate: Up to £65 per hour + In IR35 (PAYE & Umbrella available)
and guidance. Experience & Skills required for the Electronic Design Engineer, Southampton: - Proven experience with computing architectures: PC-X86 or ARM - Experience with PCIe, USB, Ethernet, HDMI - Experience with Microsoft Windows Embedded and Linux porting. - It would be ideal to have knowledge of FPGAs - Understanding of EMC requirements and design constraints. more »
Stevenage, Hertfordshire, South East, United Kingdom
Oakleaf TCT
Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes The location offers excellent transportation links, outstanding learning and development opportunities, and social, charitable more »
Ashby-De-La-Zouch, Leicestershire, East Midlands, United Kingdom
CMR & Life Sciences
programming experience. C# programming experience (will be an advantage). Knowledge of software-based microsystems/control and communication systems, including Modbus, TCP-IP Ethernet, network communications, and its redundancy. Knowledge of automation and control system cybersecurity standards such as IEC62443. Knowledge of operating systems such as QNX, Linux, and more »
understanding of mechanics. Knowledge of Siemens S7 and automation systems. Good working knowledge Networking and BUS systems. Experience and knowledge of complex IT systems. Ethernet/IP based device communication. Windows & Linux operating system experience Familiar with the Provision and Use of Work Equipment Regulations 1998 (PUWER) and LOLER UK more »
Employment Type: Permanent
Salary: Paid O/Time, Travel Time, 33 days A/L, Pension + Life Cover + van +++
Milton Keynes, Buckinghamshire, South East, United Kingdom
Verto People
/Control System Engineer/PLC Programmer desirables: Working knowledge of pneumatic and electrical test equipment Planning and managing projects Industrial communication protocols: PROFINET, EtherNET, EtherCAT etc PLC engineering tools more »
interfacing to flash memory, including in-field update techniques Appreciation of Cryptographic algorithms and disciplines Knowledge of SerDes technology Design experience with PCIe/Ethernet/CXL protocol processing Linux kernel and build system knowledge; OpenBMC, OpenBIC an advantage Good knowledge in cloud computing and data centre infrastructures Microprocessor ISA more »