151 to 175 of 312 Ethernet Jobs

and 64-bit microprocessors Understanding of EMC design considerations Embedded programming experience or strong awareness Familiarity with version control tools Knowledge of communication protocols such as CAN, Ethernet, RS485, USB, and diagnostic systems More ❯

and 64-bit microprocessors Understanding of EMC design considerations Embedded programming experience or strong awareness Familiarity with version control tools Knowledge of communication protocols such as CAN, Ethernet, RS485, USB, and diagnostic systems More ❯

to firmware design (RTCA DO-254 or similar) Experience required: FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD is also required. Cryptography and anti-tamper techniques Electronics test methods and equipment HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or More ❯

re looking for: 1–2 years’ experience in customer support or call handling Strong communication and problem-solving skills Confident with Microsoft Office and basic networking (Wi-Fi/ethernet) Organised, proactive, and customer-focused Bonus: service desk experience, payments knowledge, or PCI compliance You’ll benefit from: 25 days annual leave + your birthday off Private medical insurance (Bupa More ❯

and high-speed interconnect technology Degree (BSc/BEng/MSc/MEng) in Electronics Engineering or equivalent Experience of high-speed serial communication interfaces/protocols (e.g. PCIe, Ethernet/IEEE802.3, SPI, I2C, etc.) and high-speed bus architectures (e.g. DDR3/4) Use of high-speed digital design techniques such as signal termination, controlled impedance, matched length tracking More ❯

experience Experience in hardware/panel design, motor sizing, component selection, drive system selection and programming, robotics and motion control. Experience with automation network interfaces for data and control (Ethernet, DeviceNet, ControlNet) Experience in machine vision setup and programming preferred Working knowledge of NEC code AutoCAD experience preferred. Results oriented personality and ability to work in a team-oriented environment. More ❯

licence required. Proficient in debugging and analysis using tools such as: Wireshark. Vector tools (e.g., CANoe, CANalyzer). Putty. Media converters. JTAG flashing. Familiarity with automotive communication protocols: CAN. Ethernet (Some IP). A2B (Automotive Audio Bus). Education Required: Bachelor's degree in Electrical Engineering, Electronics, Automotive Engineering, Computer Science, or a related technical discipline. Master's degree preferred More ❯

licence required. Proficient in debugging and analysis using tools such as: Wireshark. Vector tools (e.g., CANoe, CANalyzer). Putty. Media converters. JTAG flashing. Familiarity with automotive communication protocols: CAN. Ethernet (Some IP). A2B (Automotive Audio Bus). Education Required: Bachelor's degree in Electrical Engineering, Electronics, Automotive Engineering, Computer Science, or a related technical discipline. Master's degree preferred More ❯

or 1+ years with a Master's degree). Strong experience or working knowledge of avionics systems and electrical integration. Familiarity with: • RS422/RS232, PC104, TCP/IP, Ethernet, IEEE-488, MMSI, MIL-STD-1553 • Military standards like MIL-STD-810, MIL-STD-461, and MIL-STD-1472 Comfortable working onsite in a cross-functional lab environment (hardware, test More ❯

Input - Collaborate on the design of bespoke control panels, including component selection, wiring schematics, and integration with hydraulic and mechanical systems. Communication Protocols - Work with industrial networks such as EtherNet/IP , PROFIBUS , and Modbus , ensuring seamless integration across systems. Testing & Commissioning - Lead FAT and SAT activities, troubleshoot issues on-site, and ensure systems meet performance and safety standards. Customer More ❯

and high-speed interconnect technology Degree (BSc/BEng/MSc/MEng) in Electronics Engineering or equivalent Experience of high-speed serial communication interfaces/protocols (e.g. PCIe, Ethernet/IEEE802.3, SPI, I2C, etc.) and high-speed bus architectures (e.g. DDR3/4) Use of high-speed digital design techniques such as signal termination, controlled impedance, matched length tracking More ❯

telemetry systems (Prism/ScopeX) Installing, testing, and validating PLC code against URS on-site Integrating with legacy PLC systems to ensure operational continuity Commissioning fibre optic networks, radio Ethernet, and Profibus DP Troubleshooting and resolving issues during commissioning Providing regular updates to the Senior Automation Engineer What We're Looking For in a Multi Skilled/Automation Engineer Proven More ❯

how very large GPU deployments are networked, powered, cooled, and optimised across multiple data centre environments. Core Responsibilities: Cluster Architecture: Design and define scalable topologies, spanning compute, interconnects (InfiniBand, Ethernet), storage, and orchestration layers. Workload Analysis: Model and assess AI/ML workloads (such as LLM training and inference) to guide design choices on latency, bandwidth, and GPU density. Networking More ❯

Knowledge in several of these areas is preferred: • Advanced experience High-Speed Printed Circuit Board design using Altium Designer. • Ability to design multilayer PCBs with USB 3, PCI-E, Ethernet and other high-speed interfaces. • Good knowledge of onboard PCB power supply design. • Good knowledge of PCB to chassis connector methods to support high speed digital interfaces. • Ability to work More ❯

customer satisfaction. Collaborate with design engineers to provide input into hardware design and develop core product software. Interface with third-party equipment using C# language and protocols such as Ethernet, Serial, Ethercat, CAN, and Profibus. Analyse engineering systems to advise on automation methods and post-test diagnostics for fault rectification within complex engineering systems. What You Will Bring: A strong More ❯

Experience with high-speed digital and high-density circuit card designs involving embedded processors or FPGAs. Familiarity with fiber optic interface designs and lab instrumentation such as oscilloscopes and Ethernet network testers. Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer. Still have questions? Reach out to Jarrett at What to Expect Applicants selected for More ❯

routing requirements. Provide troubleshooting to enable network fix actions and escalation via documented ticketing processes. Plan, coordinate, and manage analog- and IP-based voice services; modernize existing connections to Ethernet-based (public or private) transport to increase service performance as required. Provide worldwide access using technologies and support of zero-trust environments. Coordinate with the USACE team for DAR-related More ❯

of power distribution networks for high-performance components, with proficiency in simulation tools like Ansys SIwave. • Proven ability to design high-speed communication interfaces and memory interfaces (i.e., PCIe, Ethernet, DDR3/4, etc.), and experience with tools like Hyperlinx for signal integrity analysis. • Solid understanding of system integration, analog design, sensor integration, digital signal processing, low power design, and More ❯

in copper and fiber optic cabling systems, closet hardware, connecting blocks, fiber enclosures, and patch panels. • Comprehensive telecom work, wiring practices, underground work, color code terminations, signal flow, and Ethernet/DSL connections. • 3-5 years of networking infrastructure experience or CCNT certification required. • Strong IT infrastructure background with knowledge of networking principles, wiring standards, cable/fiber splicing, termination More ❯

collaborate with other team members to ensure the successful completion of projects. Key Responsibilities: • Cable Installation: Pull, route, and install various types of cables, including fiber optic, coaxial, and Ethernet, through walls, ceilings, and conduit pathways in accordance with project specifications and industry standards. • Cable Termination: Perform precise terminations of fiber optic and copper cables, including the installation of connectors More ❯

collaborate with other team members to ensure the successful completion of projects. Key Responsibilities: • Cable Installation: Pull, route, and install various types of cables, including fiber optic, coaxial, and Ethernet, through walls, ceilings, and conduit pathways in accordance with project specifications and industry standards. • Cable Termination: Perform precise terminations of fiber optic and copper cables, including the installation of connectors More ❯

computer systems and application software, ensuring they meet the highest standards of functionality and efficiency Develop and maintain expertise in low-latency/high-bandwidth, interconnected infrastructure (including InfiniBand, Ethernet, RDMA/RoCE, and others) Monitor and evaluate the efficiency and effectiveness of infrastructure service delivery methods and procedures Partner with internal teams to develop prioritization, metrics, and processes around More ❯

KPIs (you may be required to provide evidence) Working knowledge of at least three of the following technology areas – PaaS, IaaS, SD-WAN, Penetration Testing, MDR/EDR, PowerBI, Ethernet/Broadband, Private Cloud, Databases. More ❯

on-call rota What youll bring? 10+ years in telecoms installation, commissioning, and support Expert in CWDM/DWDM fault finding (Huawei, Ekinops, Ciena, ADVA) Skilled in optical/ethernet testing (BER, RFC2544, Y.1564, OSA, OTDR) Strong PDH/SDH and IP networking knowledge Familiar with Nokia, Keymile, Marconi systems and NMS platforms Excellent problem-solving and analytical skills Self More ❯

Software Control via backups and routine verification. Maintaining a change control system when software is requested. HMI & SCADA system backups and modifications. Setup and maintenance of site control networks (Ethernet, DH+, Profibus, Profinet, RS232, etc..), including managed switch configuration. Conduct planned maintenance and/or calibrate instrumentation to Southern Water standards to ensure reliability and accuracy. Respond to faults/ More ❯